| 3m
Loading Ramp |
Ramp
Floor |
4.3m
Loading Ramp |
| 
|
3mm
galvanised plate with corrugations every 250mm.
|
|
| Purpose:
For yards holding/working less than 100 head. The benefit
of this ramp is that it is easily moved form yard to yard
as it fits in the back of a one tone ute (collapsible design
only)
Specification:
350 & 450 grade galvanised
SHS
Large A frame: 50x50x1.6mm
Small A frame: 40x40x1.6mm
Rails: 40x40x1.6mm
Floor: 3mm galvanised plate
(with corrugation every 250mm)
Construction
Options: collapsible, permanent or collapsible/adjustible.
|
|
Purpose:
For yards holding/working less than 400 head. This ramp has
a 15 degree incline over 4.6m making it easy to load and unload
cattle.
Specification:
350
& 450 grade galvanised SHS
Large A frame:
65x65x3mm
Small A frame: 50x50x1.6mm
Rails: 50x50x1.6mm
Floor: 3mm galvanised plate
(with corrugation every 250mm)
Construction
Options: collapsible or permanent.
|
| 4.3m
Loading
Ramp with Side Load |
Purpose:
For yards holding / working
less than 600 head. This ramp is
designed for loading cattle onto
cattle crates with slide load doors.
It also has a 15 degree incline over
4.6m making it easy to load &
unload cattle.
Specification:
350 & 450 grade galvanised SHS
Large
A frame 65 x 65 x 3mm
Small A frame 50 x 50 x 1.6mm
Rails 50 x 50 x 1.6mm
Floor: 3mm galvanised plate
(with corrugation every 250mm)
Side load platform: slide gate & door
wings.
Construction options: Collapsible
or permanent.
|
  |
| 4.3m
Loading
Ramp with Side Load & Walkway |
| Purpose:
For yards holding / working
less than 600 head. This ramp is
designed for loading cattle onto
cattle crates with slide load doors.
It also has a 15 degree incline over
4.6m making it easy to load &
unload cattle.
Specification:
350 & 450 grade galvanised SHS
Large
A frame 65 x 65 x 3mm
Small A frame 50 x 50 x 1.6mm
Rails 50 x 50 x 1.6mm
Floor: 3mm galvanised plate
(with corrugation every 250mm)
Side load platform: slide gate & door
wings. Non-slip walkway with handrail
Construction options: Collapsible
or permanent.
|
 |
4.3m
Permanent Heavy Duty Loading
Ramp with Side Load |
 |
Purpose:
Heavy duty ramp built for high volume use. This ramp is designed
for loading cattle into cattle crates with side load doors.
It also has a 15 degree incline over 4.6m making it easy to
load & unload cattle. This ramp has a fully welded construction
and a rubber coated floor to decrease noise.
Specification:
Australian made high tensile,
450 grade galvanised SHS
Large A frame: 65 x 65 x 3mm
Small A frame: 50 x 50 x 1.6mm
Rails: 50 x 50 x 1.6mm with 1.6 GAL sheeting
Ramp Support Runners: 150 x 50 x 4mm
Floor: 3mm galvanised plate
(with corrugation every 250mm)
Side load platform: slide gate & door wings
Non-slip walkway with handrail
Construction options: Permanent.
|
| Modular
Double Deck Ramp |
| 
|
We
have designed and engineer approved a Modular Double Deck
Ramp suitable for high volume usage in feed lots or
cattle yards. This modular ramp is built in five section at
Deweld and bolted together within two
hours on site.
Investment
in one of these ramps
has many benefits:
• Saves time and money with quick handling
and less labour and bruising
• Saleable asset
• Handle various size beasts
• Quick to install
• Designed for high volume use |
| Standard
features include:
• Fully sheeted with GAL
• 700 or 770mm wide race
• Side load platform
• 1.8m level run before ramp decline
• 350
& 450 grade galvanised SHS
•
Floor
3mm galvanised plate pressed into corrigations every 250mm,
rubber coated
•
Meets work place health
and safety requirements
• Has a 50mm cleaning gap between
floor and side sheeting
• 14m long x 2.7m wide
• Top deck loading platform lifts up
• Ladder to top deck for quick access
Design
options
Position of the lower race
(left or right handed). Other slight variations to the design
can be made to suit the user.
*Bolt
together on site within 2 hours
|
|
| 3m
Mobile Ramp |
Image:
Towing Position
|
Purpose:
For unloading and loading cattle in a small temporary yard
and for moving sick or injured beast. Property use only.
Specification:
• Single axle
• Tilting A-frame
• Un-registered
Various
options in the trailer ramp are available. |
| 4.3m
Trailer Ramp |
| Purpose:
This mobile ramp can carry up to 20
panels to erect a temporary yard for loading and unloading
cattle. Plus it can double as a float for moving animal.
Specification:
Registered
• Electric brakes
• 2 Tonne trailer
• Tandem trailer
• Tilting A-frame
(one man operation)
• Includes jockey wheel
• Can carry up to 20 panels
• 4.3m ramp
• 2 x slide gates
Specification: Un-registered
• Tandem trailer
• Tilting A-frame
• 4.3m ramp
• No brakes (property use only)
• Includes jockey wheel
• Can carry up to 20 panels
• 2 x slide gates |
Image:
Half Elevated Position
|
Image:
Elevated Working Position
|
|
| |
Gates - Other Yard Components
|
