GATE
IN FRAME FEATURES |
|
Locking System |
|
Joining
System |
| Chain
Latch - firm lock with quick and easy release.
|
|
This
crimped S.H.S creates a firm join by simply sliding together.
Purpose: Split for transport.
|
| Low
2.4m G.I.F. |
2.4m
G.I.F. |
3.3m
G.I.F. |
| |
|
|
| Purpose:
Intermediate yard gate
(low volume use)
Frame: 2m high x 2.4m wide
40 x 40 x 1.6mm
Gate: 1.5m high x 2.15m wide
40 x 40 x 1.6mm x 6 rails
Australian made high tensile,
450 grade galvanised SHS |
Purpose:
Intermediate yard gate
Frame: 2.4m high x 2.4m wide
50 x 50 x 1.6mm
Gate: 1.5m high x 2.15m wide
40 x 40 x 1.6mm x 6 rails
Split frame for transport
Australian made high tensile,
450 grade galvanised SHS |
Purpose:
Entry yard gate
Frame: 2.4m high x 3.3m wide
50 x 50 x 1.6mm
Gate: 1.5m high x 3m wide
50 x 50 x 1.6mm x 6 rails
Split frame for transport
Australian made high tensile,
450 grade galvanised SHS |
| Double
Gate in Frame |
| |
Purpose:
Entry gate
Frame: 2.4m high x 4.6m wide
65 x 65 x 3mm
Gates: 1.8m high x 2.15m wide x 2 off
40 x 40 x 1.6mm
Australian
made high tensile,
450 grade galvanised SHS |
| Manway
Gate |
|
Manway
Gate in Panel |
| |
|
 |
| Purpose:
Personnel access gate
Frame: 2.4m high x 0.75m wide
Gate: 1.8m high x 0.6m wide
40 x 40 x 1.6mm x 6 rails
Australian made high tensile,
450 grade galvanised SHS |
|
Purpose:
Personnel access gate with the same dimensions as a standard
panel
Overall height: 2.4m
Panel height: 1.8m
Gate height: 1.8m
Overall width: 2.2m
Gate width: 0.6m
40
x 40 x 1.6mm x 6 rails
Australian made high tensile,
450 grade galvanised SHS |
| Slide
Gate |
|
1.4m
Draft Gate |
|
|
 |
Purpose:
Controls movement in race
Nylon rollers
50 x 50 x 1.6mm rails
Australian made high
tensile,
450 grade galvanised SHS
Options:
700 or 770 wide clear inside width.
|
|
Purpose:
Portable draft gate
Frame: 2m high x 1.4m long
50
x 50 x 1.6mm
Gate: 1.3m clear inside width x 6 rails
40 x 40 x 1.6mm
Australian made high tensile,
450 grade galvanised SHS
Left or right handed - reversible
Shuts up against the frame - chain latch
|
| 2.5m
Draft Gate in Panel |
Bolt
on Hinge |
2.5m
Draft Gate |
 |
 |
 |
| Purpose:
Portable / permanent, increases pound area
with smaller drafting gate
2m high x 2.5m long
Gate: 1.5m clear inside width x 6 rails
50 x 50 x 1.6mm
Australian made high tensile,
450 grade galvanised SHS
Gate can be configured into left or right handed
Shuts up against the frame - chain latch |
Allows
for left & right hand
Hinges reinforced with plate
to prevent tearing
Strong & durable
Easy for replacement |
Purpose:
Portable / permanent,
large drafting gate
2m high x 2.5m long
Gate: 2.3m clear inside width x 6 rails
50 x 50 x 1.6mm
Australian made high tensile,
450 grade galvanised SHS
Gate can be configured into
left or right handed
Shuts up against the frame - chain latch |
| Draft
gate with Platform |
Race
Bow |
Spear
Trap |
 |
|
 |
Purpose:
The use of platform and
gate arms will increase safety for employees when working yards,
as they are not in with cattle and decrease time and labour
required
in working high volumes of cattle.
Outside Frame: 50x50x1.6mm
Gate: 50 x 50 x 1.6mm
Australian made high tensile,
galvanised SHS |
Purpose:
Stop race from spreading
2.4m high x 0.7m clear inside width
50 x 50 x 1.6mm
Australian made high tensile,
450 grade galvanised SHS |
Purpose:
One way entry gate
for trapping cattle
Frame: 1.95m high x 0.92m wide
75 x 75 x 1.6mm
6 x rubber coated spear arms
40 x 40 x 1.6mm
0.32m long on 45º angle
Australian made high tensile,
450 grade galvanised SHS |
